Smart Contract Audit Report
ArbInu is a new ERC-20 token on Arbitrum.
For this audit, we reviewed the project team's ArbInu contract at 0xdd8e557c8804d326c72074e987de02a23ae6ef84 on the Arbitrum Mainnet.
Informational findings were identified and the team may want to review them.
Date: January 30th, 2023.
Finding #1 - ArbInu - InformationalDescription: The
routerstate variables and the
addLiquidityfunctions are not used in the contract.
Recommendation: The above state variables and functions should either be removed to reduce contract size and deployment costs or utilized in a way that fits the project team's intended functionality.
Finding #2 - ArbInu - InformationalDescription: The
getBasePairAddrfunction returns the
basePairis set to the 0x00 address and cannot be modified.
Recommendation: The above function should either be removed to reduce contract size and deployment costs or modified in a way that fits the project team's intended functionality.
Finding #3 - ArbInu - InformationalDescription: Although the SafeMath library is utilized, the contract is deployed with Solidity v0.8.17 which has built-in overflow/underflow checks.
Recommendation: SafeMath could be safely removed to reduce contract size, deployment costs, and gas costs on all transactions that utilize it.
- The total supply of the token is set to 1 billion $ARBINU [1,000,000,000].
- No public mint or burn functions are present, though the circulating supply can be decreased by sending tokens to the 0x..dead address.
- At the time of writing this report, there are 2,595 total token holders. The token allocation is as follows:
- 5.47% of the total supply belongs to the deployer.
- 10% of the total supply is split between the 0x00 address, 0x001 address, 0x002 address, 0x003 address, 0x004 address, and the 0x..dead address.
- The next five EOAs own a cumulative 8.62% of the total supply.
- 6.15% of the total supply is in Sushiswap liquidity.
- Of that liquidity, 91.69% of the LP tokens are stored in a DXSale token locking contract and will unlock on December 31st, 2023.
- 5.74% of the LP tokens belong to an EOA.
- The contract enforces a maximum wallet amount that prevents a transfer from occurring if the recipient's token balance will exceed 20 million tokens after the transfer occurs.
- Although a maximum transaction limit is present in the contract, it has been permanently disabled.
- There is a 4% Dev fee on all transfers where neither the sender nor the recipient is excluded from fees.
- The tokens collected through the Dev fee are sent to the team's Dev wallet.
- As the contract is deployed with Solidity v0.8.17, it is protected from overflows/underflows.
- The contract complies with the ERC-20 token standard.
- Ownership has been renounced by the team.
- The owner was previously able to set the Dev fee to any percentage at any time.
- The owner was previously able to enable/disable the Dev fee at any time.
- The owner was previously able to exclude and include accounts from the Dev fee at any time.
- The owner was previously able to update the maximum transaction limit to any value at any time.
- The owner was previously able to exclude and include accounts from the maximum transaction and maximum wallet restrictions at any time.
- The owner was previously able to update the team's Dev wallet to any address at any time.
|Arbitrary Jump/Storage Write||N/A||PASS|
|Centralization of Control||Ownership has been renounced by the team.||PASS|
|Delegate Call to Untrusted Contract||N/A||PASS|
|Dependence on Predictable Variables||N/A||PASS|
|Improper Authorization Scheme||N/A||PASS|
|Outdated Compiler Version||N/A||PASS|
|Unused Code||The contract contains unused code as described in Findings #1 & #2.||PASS|
|Overall Contract Safety||PASS|
($) = payable function # = non-constant function Int = Internal Ext = External Pub = Public + [Int] IERC20 - [Ext] totalSupply - [Ext] balanceOf - [Ext] transfer # - [Ext] allowance - [Ext] approve # - [Ext] transferFrom # + Context - [Int] _msgSender - [Int] _msgData + Ownable (Context) - [Pub]
# - [Pub] owner - [Int] _checkOwner - [Pub] renounceOwnership # - modifiers: onlyOwner - [Pub] transferOwnership # - modifiers: onlyOwner - [Int] _transferOwnership # + [Lib] SafeMath - [Int] tryAdd - [Int] trySub - [Int] tryMul - [Int] tryDiv - [Int] tryMod - [Int] add - [Int] sub - [Int] mul - [Int] div - [Int] mod - [Int] sub - [Int] div - [Int] mod + [Lib] Address - [Int] isContract - [Int] sendValue # - [Int] functionCall # - [Int] functionCall # - [Int] functionCallWithValue # - [Int] functionCallWithValue # - [Int] functionStaticCall - [Int] functionStaticCall - [Int] functionDelegateCall # - [Int] functionDelegateCall # - [Int] verifyCallResult + [Int] IUniswapV2Pair - [Ext] name - [Ext] symbol - [Ext] decimals - [Ext] totalSupply - [Ext] balanceOf - [Ext] allowance - [Ext] approve # - [Ext] transfer # - [Ext] transferFrom # - [Ext] DOMAIN_SEPARATOR - [Ext] PERMIT_TYPEHASH - [Ext] nonces - [Ext] permit # - [Ext] MINIMUM_LIQUIDITY - [Ext] factory - [Ext] token0 - [Ext] token1 - [Ext] getReserves - [Ext] price0CumulativeLast - [Ext] price1CumulativeLast - [Ext] kLast - [Ext] mint # - [Ext] burn # - [Ext] swap # - [Ext] skim # - [Ext] sync # - [Ext] initialize # + [Int] IUniswapV2Factory - [Ext] feeTo - [Ext] feeToSetter - [Ext] getPair - [Ext] allPairs - [Ext] allPairsLength - [Ext] createPair # - [Ext] setFeeTo # - [Ext] setFeeToSetter # + [Int] IUniswapV2Router01 - [Ext] factory - [Ext] WETH - [Ext] addLiquidity # - [Ext] addLiquidityETH ($) - [Ext] removeLiquidity # - [Ext] removeLiquidityETH # - [Ext] removeLiquidityWithPermit # - [Ext] removeLiquidityETHWithPermit # - [Ext] swapExactTokensForTokens # - [Ext] swapTokensForExactTokens # - [Ext] swapExactETHForTokens ($) - [Ext] swapTokensForExactETH # - [Ext] swapExactTokensForETH # - [Ext] swapETHForExactTokens ($) - [Ext] quote - [Ext] getAmountOut - [Ext] getAmountIn - [Ext] getAmountsOut - [Ext] getAmountsIn + [Int] IUniswapV2Router02 (IUniswapV2Router01) - [Ext] removeLiquidityETHSupportingFeeOnTransferTokens # - [Ext] removeLiquidityETHWithPermitSupportingFeeOnTransferTokens # - [Ext] swapExactTokensForTokensSupportingFeeOnTransferTokens # - [Ext] swapExactETHForTokensSupportingFeeOnTransferTokens ($) - [Ext] swapExactTokensForETHSupportingFeeOnTransferTokens # + ArbInu (Context, IERC20, Ownable) - [Pub] # - [Pub] name - [Pub] symbol - [Pub] decimals - [Pub] totalSupply - [Pub] balanceOf - [Pub] getBasePairAddr - [Pub] transfer # - [Pub] allowance - [Pub] approve # - [Pub] transferFrom # - [Pub] increaseAllowance # - [Pub] decreaseAllowance # - [Pub] excludeFromFee # - modifiers: onlyOwner - [Pub] includeInFee # - modifiers: onlyOwner - [Pub] excludeFromMaxAmount # - modifiers: onlyOwner - [Pub] includeInMaxAmount # - modifiers: onlyOwner - [Ext] setDevFeePercent # - modifiers: onlyOwner - [Ext] setMaxTxPercent # - modifiers: onlyOwner - [Pub] setDevWalletAddress # - modifiers: onlyOwner - [Ext] replaceDevWalletAddress # - modifiers: onlyOwner - [Ext] ($) - [Prv] _getValues - [Prv] _takeDev # - [Prv] calculateDevFee - [Prv] removeAllFee # - [Prv] restoreAllFee # - [Pub] isExcludedFromFee - [Pub] isExcludedFromMaxAmount - [Prv] _approve # - [Prv] _transfer # - [Prv] swapTokensForEth # - [Prv] addLiquidity # - [Prv] _tokenTransfer # - [Pub] disableFees # - modifiers: onlyOwner - [Pub] enableFees # - modifiers: onlyOwner
SourceHat (formerly Solidity Finance - founded in 2020) has quickly grown to have one of the most experienced and well-equipped smart contract auditing teams in the industry. Our team has conducted 1300+ solidity smart contract audits covering all major project types and protocols, securing a total of over $50 billion U.S. dollars in on-chain value across 1500 projects!. Our firm is well-reputed in the community and is trusted as a top smart contract auditing company for the review of solidity code, no matter how complex. Our team of experienced solidity smart contract auditors performs audits for tokens, NFTs, crowdsales, marketplaces, gambling games, financial protocols, and more!
Contact us today to get a free quote for a smart contract audit of your project!
What is a SourceHat Audit?
Typically, a smart contract audit is a comprehensive review process designed to discover logical errors, security vulnerabilities, and optimization opportunities within code. A SourceHat Audit takes this a step further by verifying economic logic to ensure the stability of smart contracts and highlighting privileged functionality to create a report that is easy to understand for developers and community members alike.
How Do I Interpret the Findings?
Each of our Findings will be labeled with a Severity level. We always recommend the team resolve High, Medium, and Low severity findings prior to deploying the code to the mainnet. Here is a breakdown on what each Severity level means for the project:
- High severity indicates that the issue puts a large number of users' funds at risk and has a high probability of exploitation, or the smart contract contains serious logical issues which can prevent the code from operating as intended.
- Medium severity issues are those which place at least some users' funds at risk and has a medium to high probability of exploitation.
- Low severity issues have a relatively minor risk association; these issues have a low probability of occurring or may have a minimal impact.
- Informational issues pose no immediate risk, but inform the project team of opportunities for gas optimizations and following smart contract security best practices.